---
title: Estimation of Handgrip Position Based on Force Measurement During Steady Pedaling (World Congress of Cycling Science 2015)
tags:  #自転車 #cycling  
author: [Real-World Information Systems Lab](https://www.docswell.com/user/tamlab)
site: [Docswell](https://www.docswell.com/)
thumbnail: https://bcdn.docswell.com/page/54EM3XXQ7W.jpg?width=480
description: Yusuke Tamura, Kojiro Matsushita, Hisashi Osumi, &quot;Estimation of Handgrip Position Based on Force Measurement During Steady Pedaling,&quot; Journal of Science and Cycling, Vol.4, No.2 (World Congress of Cycling Science 2015), pp.71-72, 2015.
published: March 17, 22
canonical: https://www.docswell.com/s/tamlab/5R8Y4Z-WCCS2015
---
# Page. 1

![Page Image](https://bcdn.docswell.com/page/54EM3XXQ7W.jpg)

Estimation of Handgrip Position Based on Force Measurement During Steady Pedaling
1
2
Yusuke TAMURA , Kojiro MATSUSHITA , Hisashi OSUMI
1 The
3
University of Tokyo
2 Gifu
University
3 Chuo
University
tamura@robot.t.u-tokyo.ac.jp
Introduction
There have been many studies on pedaling skills to improve cycling efficiency (Bini et al., 2013). Riding position of upper body as well as leg motion is very important for cycling
because it has a substantial impact on air resistance and physical fatigue (Burke &amp; Pruitt, 2003). Although camera-based motion capture systems are the most popular solution to
measure riders’ position during cycling, they limit the range of motion and cannot be applied to actual outdoor cycling.
In this study, we aim for developing a bike-mountable position estimation system. For this purpose, as a first step, we propose a method for estimation of handgrip position
based on the force measurement during steady pedaling.
Methods
Preliminary experimental results
Equipments
Estimation method
Three parameters (FX, FY, MX) were chosen for the
estimation. The proposed method classifies the
observed data into three classes corresponding to
the positions of handgrip, such as drops, hoods, and
tops based on the SVM (Support Vector Machine;
Cortes &amp; Vapnik, 1995).
6-axis force/torque sensor
(BFS067XS102EU6S, Leptrino)
Fz: ±1000N, Fx/Fy: ±500N
Mx/My/Mz: ±40Nm
SVM
Wattbike Trainer (Wattbike Ltd.)
Feature vector: x = (FY 0 , FZ 0 , MX 0 )
Discriminant function:
N
X
f (x) =
an tn k(x, xn ) + b
Drops
n=1
Hoods
Kernel: Radial Basis Function
Y
-­‐10
-­‐150
X
-­‐15
Z
Y
MX	  (Nm)
FZ	  (N)
-­‐175
-­‐200
80
-­‐20
100
120
140
80
FY	  (N)
Participants
: Kernel parameter
140
-­‐225
FY	  (N)
-­‐200
-­‐175
-­‐150
FZ	  (N)
one-against-one method was used for three classes
Procedure
Four amateur male cyclists (mean 45.5 years old)
participated in the experiments.
The pedaling load and cadence were set according
to each participant’s preference.
Learning phase: To construct an SVM classifier, 60 seconds learning data for each handgrip position was collected at
100 Hz for each participant.
Test phase: Participants changed their handgrip positions every 30 seconds and steadily pedaled 6 minutes in total.
Results &amp; Discussion
The proposed method achieves both high precision
and recall.
actual handgrip position
estimated handgrip position
Participant A
Hoods
True\Estimated
Drops
Hoods
Tops
Release
Recall (%)
Drops
40980
79
6974
0
85.3%
0
Examples of estimation
Drops
Confusion matrix
Hoods
120
xn k2
N : Number of the learning data
b : Bias
-­‐20
-­‐25
100
kx
an : Lagrange’s undeteremined multiplier
tn : Class label corresponding to the n-th learning data xn
-­‐15
-­‐25
-­‐225
k(x, xn ) = exp
-­‐10
MX	  (Nm)
Tops
48107
151
0
Tops
Release
0
99.7%
Tops
4
11
47563
0
100.0%
Release
18
96
575
496
41.9%
Precision (%)
99.9%
99.6%
86.1%
100.0%
100
Participant B
Time (s)
200
300
Drops
Hoods
Tops
0
100
Time (s)
200
300
For 3 participants, the proposed method could
estimate their handgrip positions accurately.
For 1 participant (Participant B), the method did not
properly work. Because his riding form during the
test phase might be quite different from the form
during the learning phase.
To improve the performance, we will try to
- increase the learning data
- explore new feature value less affected by the
riding forms
Conclusion
We proposed a method to estimate handgrip position based on the force measurement. The proposed method can estimate the handgrip position with high reliability during
steady pedaling.
For future works, we will apply our system and estimation method to normal road bikes and develop a method to estimate positions of cyclists’ upper body.
References
R. B. Bini, P. Hume, J. Croft, A. Kilding, Pedal force effectiveness in cycling: a review of constraints and training effects, Journal of Science and Cycling, Vol.2 (1), 11-24, 2013.
E. R. Burke, A. L. Pruitt, Body Positioning for Cycling, High-Tech Cycling second edition, E. R. Burke (ed.), pp.69-92, Human Kinetics, 2003.
C. Cortes, V. Vapnik, Support-Vector Networks, Machine Learning, Vol.20, pp.273-297, 1995.
C-C. Chang, C-J. Lin, LIBSVM: A Library for Support Vector Machines, ACM Transactions on Intelligent Systems and Technology, Vol.2, 27:1-27, 2011.
Science &amp; Cycling Conference, 1-2 June, 2015, Utrecht


